AI for the Production
Every minute counts in production.
If experienced employees are missing, processes come to a standstill or workflows are not properly documented, this costs time, money and quality. Machines come to a standstill, new colleagues have to be painstakingly trained - and valuable knowledge is lost.
This is where meloki comes in.
I am your local AI assistant for manufacturing and production.
I document, explain and support - so that work steps can continue even if people or resources are unavailable at short notice. Everything is local, secure and always available.
0 +
Use cases
0
Compromises
0 %
Scalable
Why an AI for the Production?
Problem: Many production processes are only known through experience - if someone drops out, knowledge is lost.
Solution: I record work instructions, machine parameters, test reports and empirical values centrally.
New employees can read up on how a work step works at any time - step by step, illustrated and easy to understand.
Production chat
Kevin - Production -
meloki, we need to refit the bearing housing on the M-240 machine. Can you please tell me which screws are used and what torque they need to be tightened to?
Of course. According to the production documentation "Assembly M-240 / housing unit", the following applies:
Use 4x hexagon socket screws M10 x 40, grade 10.9
Screw positions: 2 front left, 2 rear right - see assembly drawing "M240_GH_A2.pdf", page 3
Tightening torque: 48 Nm ±2 Nm
Washers type A10, galvanized
Screws are available in stock compartment B12 / row 4
After tightening, visually check for flush fit, then test run for 30 seconds without load
Should I open the drawing directly on the machine terminal?
No, thanks - please make the file available for me to download here in the chat.
Sure - here: "Assembly drawing_M240_Schnitt.pdf".
All fastening points are marked there, including the tightening sequence and control elements.
I can also summarize the individual steps in an illustrated work instruction if you need them for familiarization.
Perfect. That's exactly how I imagine working together - thank you, meloki. 🥳
👋 Write to us
We write back
Telephone
Address
Contact us
